Instruction of RF Inflatable LED Ball

Instruction of RF Inflatable LED Ball

A full set of inflatable ball (Image 1)

• 1PC Charger (12.6V 2A)
• 1PC Mouth Piece Cover
• 1PC Inflatable Ball

                                 Image 1

Step 1: Active the balls(Image 2)

When the user get the ball, the balls are in sleep mode, please use the charger to active them first. After connecting to power, then the balls are ready to be controlled.

Please full charge them before use, the charger indicator light will turn to green from red after full charged.

Note: if the balls too long time do not get signals from the remote controller, to save power they will turn into sleep mode again, then will need connect power to active it again.

                           Image 2

A full set of pump (Image 3)

• 1PC pump
• 1PC adapter (12V 2A)
• 1PC mouth piece

                        Image 3

Step 2: Inflate the balls

• Assemble the pump first. Connect power,put the middle size mouth piece on.
• Inflate the ball with the pump, when the ball is about 70% inflated,screw on the ball mouth piece(Image 4).Then screw out the small cover on the main mouth piece (Image 5). Then inflate the ball till 100% inflated.

                        Image 4                                                                  Image 5

A full set of controller (Image 6)

• 1PC Controller
• 1PC Antenna
• 1PC Charger (6V1A)

                        Image 6    

                        Image 7    

Note:Before using the controller, please assemble the antenna first.

The controller has hidden functions. (Press and hold 2-7 color function buttons at the same time can get hidden functions) (Image 8)

                        Image 8